Quote:
Originally Posted by jtucker
Does anyone have a list of clevis pins and standard sizes for the Model A?
Does anyone have a source for oversize clevis pins?
Trying to take some of the slop out of my rods.
Thx,
Jim
|
Jim - Snyder’s and Bert’s both sell the oversized pins. I suspect other vendors do as well. Standard side is 0.310” (nominal 5/16”) oversized is 0.340” (drill out your rod ends to 11/32 (0.344”)).
All the pins in the braking system, both service brake and emergency brake, are the same.
This is a worthwhile project. Suggest you just order a set of oversized pins and do everything, that way you won’t have to remember what are smaller pins and what are larger.