Re: Stipe Oil pumps
I am not familiar with the Dan Price oil pump. On my engine, with the Strip oil pump, I had to drill and tap another hole at the proper location to take oil from the pump and send it to the full flow filter. The oil then went back to the oil gallery where the pipe tap is located. You should be able to figure out the plumbing by studying the oil pump and where the oil come out in relation to where the gallery is.
You may need a plug to prevent oil from going directly into the gallery from the pump. I am also not all that familiar with the B engine. Is there a place to access the gallery from the outside of the engine? Maybe by drilling and tapping a hole?
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
Last edited by nkaminar; 08-03-2024 at 07:37 PM.
|