Victoria seat rests
for you guys that cannot find original front seat rest studs. for the Victoria-A400 -180a and deluxe tudor. here is how I made some. buy some 3/8 X3 NC step bolts. they are a carriage bolts with a big head. I chucked them up in the lathe and turn down the square part of the bolt. then I ran a die down and cut the threads down to the head. I took a freeze plug cut the side down a little then I heated the freeze plug and shaped it over the head of the bolt. then cut it down to 2 1/4. maybe that can some help. the one on the far right is the original.
|