Re: Shortened pitman arm
I would not try JB Weld, but you could weld up the ball and then grind it spherical. A special tool is normally used on a lathe to cut a spherical shape. You will have a hard time getting it true by hand and it would be more than $8 of your time.
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
|