The Ford Barn - View Single Post

flatjack9 · 05-11-2024, 10:12 AM

On my pump test stand, I have a valve to shut off flow and test relief valve pressure. I restrict the flow to 40 psi back pressure and check flow rate. Typically 1.5 gpm.

05-11-2024, 10:12 AM	#225
flatjack9 Senior Member Join Date: May 2010 Location: Oshkosh, Wi Posts: 4,544	Re: 276 stroker from 35 years of parts On my pump test stand, I have a valve to shut off flow and test relief valve pressure. I restrict the flow to 40 psi back pressure and check flow rate. Typically 1.5 gpm.