Re: 276 stroker from 35 years of parts
I used the early gears in my late (8CM) Merc. Worked just great. As you proceed to install the timing cover, try it without a gasket to check camshaft end play. If it's fine (I like a minimum of .003") I just use a THIN smear of RTV (or preferably an anaerobic sealer) without the gasket. Not everyone has the anaerobic stuff but RTV silicone works fine.
__________________
"It don't take but country smarts to solve the problem" (Smokey Yunick)
'41 Merc Town Sedan / 260" 8CM engine
'66 Fairlane four door / "warmed up"  302
|