Thread: Block Restamp
View Single Post
Old 04-29-2024, 06:52 PM   #9
CWPASADENA
Senior Member
 
CWPASADENA's Avatar
 
Join Date: May 2010
Location: PASADENA, CA
Posts: 1,893
Default Re: Block Restamp

I have done this several times with the engine in the car. I remove the left headlight and stand behind the bumper. Try a few practice swings with a 2-3 # short handle sledgehammer before you go for real. One sharp blow and that is it. A lightweight hammer will not do it. You have to swing way too hard and you have a very confined area to work with in.

My experience,

Chris W.
CWPASADENA is offline   Reply With Quote