Quote:
Originally Posted by GB SISSON
Got some nice gears yanked out for my woodie's engine. Welded up a quick slide hammer out of junk and it worked great. Pulled 2. One beauty one, one not so much. 2 good crank gears both good came off with a 2 jaw puller that I ground a back cut on so the hooks grabbed in past the teeth. Unfortunately I had a contractor stop by about a project and then one more visitor, so no other progress. Will look around for some of those cam gear bolts this weekend and hope to get started with valves. I see it's common to lather up the cam with white lithium grease. Is stay-lube assembly lubricant good enough?
|
Over 50 years ago when I built my SBF I used STP. No issues but it was a one off type of thing that worked for a 19 year old know it all (read know nothing) kid. YRMV