The Ford Barn - View Single Post

deuce5wndw · 04-24-2024, 05:18 PM

If it's still a stock 35 spring it will be attached to the wishbone in front of the axle so it will probably have some tension on it. Use a spring spreader to hold everything in place or porta power etc.

04-24-2024, 05:18 PM	#7
deuce5wndw Senior Member Join Date: May 2010 Location: Liberty, KY Posts: 908	Re: Removing perch bolt for repair If it's still a stock 35 spring it will be attached to the wishbone in front of the axle so it will probably have some tension on it. Use a spring spreader to hold everything in place or porta power etc.