The Ford Barn - View Single Post

Seth Swoboda · 04-10-2024, 01:03 PM

Drill a small hole on the back of the hubcap through the steel. Be careful as not to go through the stainless cap on the outside. Use compressed air to blow air into the small hole. The cap should come off.

04-10-2024, 01:03 PM	#2
Seth Swoboda Senior Member Join Date: May 2010 Location: Southern Illinois Posts: 4,079	Re: Removing caps on '37 hubcaps? Drill a small hole on the back of the hubcap through the steel. Be careful as not to go through the stainless cap on the outside. Use compressed air to blow air into the small hole. The cap should come off.