Re: Misfire mystery
There are ways to use jumper wires to temporarily bypass virtually all of the normal ignition circuit wires. The vendors sell a jumper for bypassing the large cable from the coil + to and through the ignition switch and down to the distributor. I have two of them in my 'on board' tool bag. One I made and another purchased.
If you are running the modern style upper plate, mine is from Nu Rex, a jumper is easy to set up with a plain 16 gauge wire and a small tie wrap. I believe Nu Rex sells a set that allows for a quick plug and play example for roadside repairs.
__________________
"It ain't what you know for certain that gets ya in trouble. It's what ya know for certain that just ain't so!" 
Last edited by Rob Doe; 04-08-2024 at 12:42 PM.
|