Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by langus480
All great advice, and I realize now how much work and effort there is in punching a "D" hole...
Here's my thought, to cut out the original "D" nuts from the damaged section and weld them into the cross pieces.
Thoughts?
|
Well, if that's what you want to do. It is not what I would do, but just know that you must dimple the sill so the floorboard sits flat against the sill's ledge. If you don't, the floorboard does not seal and the 'undercarriage fumes & smells' will enter the cabin.