Re: Fuel polishing worked
I originally was looking at that F1NC, but from "Mr. Funnel". The one I was looking at would filter particles down to 50 microns. Which probably would've got most of the junk out. But, I chose the R12T one because it was rated down to 4 microns and I was picking up a really fine silty substance in my fuel bowl. The reason I ran the return line back into the tank is to help stir up the junk sitting at the bottom.
Using it in the tank outlet would probably be the way to go. Especially if you've got a lot of bigger chunks of junk down in there. Would help to keep the other filters from getting clogged up as fast. You'd just have to make sure you don't exceed the flow rate of tank outlet with the electric fuel pump
|