Quote:
Originally Posted by hotcoupe
Bored and stroked, the image that I posted earlier was ment to show how I modified the '32 front crossmember to accommodate a dual sheave crank pulley. The vacant area is where I am modifying a N.O.S. '30-'31 Model A crossmember. I wanted to lower the car and still use the '32 motor mounts.
Tom
|
There should be plenty of room for a dual sheave pulley with your mods - but there probably isn't enough room to cut, rework and fit a 49-53 pulley in the same spot - without being creative on how to strengthen what is left.