The Ford Barn - View Single Post

fourfords · 02-20-2024, 02:03 AM

I am replacing the rubber stems/tubes on my 21" wheeled 1929 Roadster with metal valve stems/tubes. My question is: Does the metal stem require inside hardware to stabilize the stem? I used to have a '30. It had inside hardware for its metal stems. If so, any suggestions on where to locate a vendor?

02-20-2024, 02:03 AM	#1
fourfords Senior Member Join Date: May 2010 Location: Lake Elsinore, CA. Posts: 476	Metal Stem Tire Valve question I am replacing the rubber stems/tubes on my 21" wheeled 1929 Roadster with metal valve stems/tubes. My question is: Does the metal stem require inside hardware to stabilize the stem? I used to have a '30. It had inside hardware for its metal stems. If so, any suggestions on where to locate a vendor?