The Ford Barn - View Single Post - Update on 1928-48 Universal Joint kit installation

19Fordy · 02-16-2024, 06:29 PM

I used a Dremel tool with a small cut off wheel to slice through the clips. Then pried them up and pulled them out with a pair if side cutters.

02-16-2024, 06:29 PM	#13
19Fordy Senior Member Join Date: May 2010 Location: Coral Springs FL Posts: 11,603	Re: Update on 1928-48 Universal Joint kit installation I used a Dremel tool with a small cut off wheel to slice through the clips. Then pried them up and pulled them out with a pair if side cutters.