Quote:
Originally Posted by 19Fordy
No, old U-Joint bushings are "sloppy" fit. Worn out.
Wish I new who is actually making this kit so I could request a new bushing.
|
If that cracked bushing were mine, I'd run it in the position it sits. But unlike others, I don't mind pushing my luck a bit if the physics makes sense to me.
__________________
"It don't take but country smarts to solve the problem" (Smokey Yunick)
'41 Merc Town Sedan / 260" 8CM engine
'66 Fairlane four door / "warmed up"
302