Quote:
Originally Posted by Jack E/NJ
Craig>>>Again, the engine worked perfect . . . for a very short time before starting to misfire again.
Still might be sticky valve stems after getting warmed up. Try running MMO thru carb & mixed in tank to see what happens.
|
Quote:
Originally Posted by Old Henry
Will do. Thanks for the reminder.
|
Today I did it. I added 6 oz. of MMO in the 15 gal. gas tank and filled it up. Then, while idling the engine, I drizzled 4 oz. of MMO into the carburetor - both sides. I was hoping there would be some improvement in the 30 miles I drove after that. I thought I sensed some smoothing out at times but not lasting. If my engine stumbling problem is from a sticky valve, hopefully the MMO will fix it and I'll be able to put Old Henry down for his 2 year nap knowing that he'll sleep peacefully.