Thread: '31 Tudor Sedan
View Single Post
Old 01-05-2024, 09:40 PM   #15
GeneBob
Senior Member
 
Join Date: May 2017
Location: Denver Area
Posts: 458
Default Re: '31 Tudor Sedan

jamaio, I use the FSI ignition also and I made a plate that I put in the distributor to limit the total advance to about 18 to 20 degrees total distributor advance, then set the engine timing to about 12 degrees BTDC at idle, but I really set the total engine advance to 28 to 30 degrees and let the idle advance fall where it will.
GeneBob is offline   Reply With Quote