The Ford Barn - View Single Post

koates · 12-12-2023, 06:49 PM

You should also have a close inspection of the female taper inside the hub to make sure it is not worn. It must fit the axle taper precisely. Also measure across the drum braking surface to make sure it is not machined oversize. Regards, Kevin.

12-12-2023, 06:49 PM	#3
koates Senior Member Join Date: May 2010 Location: Melbourne Australia. Posts: 2,082	Re: Ford Rear Brake Drum repair You should also have a close inspection of the female taper inside the hub to make sure it is not worn. It must fit the axle taper precisely. Also measure across the drum braking surface to make sure it is not machined oversize. Regards, Kevin.