The Ford Barn - View Single Post

cas3 · 12-04-2023, 12:37 AM

If you are going to run the helmet dizzy, you could send an original Ford coil down to skip haney in fl. and have it rewired to 12 volts. It would then need a ballast resistor, but would look proper and I've read many posts here on the barn of those modern coil conversion plates failing for some reason or another.

12-04-2023, 12:37 AM	#13
cas3 Senior Member Join Date: Jan 2011 Location: sw minnesota Posts: 4,599	Re: Ignition primary for 12v conversion If you are going to run the helmet dizzy, you could send an original Ford coil down to skip haney in fl. and have it rewired to 12 volts. It would then need a ballast resistor, but would look proper and I've read many posts here on the barn of those modern coil conversion plates failing for some reason or another.