View Single Post
Old 11-28-2023, 06:02 PM   #5
Oldgearz
Senior Member
 
Join Date: Aug 2020
Location: Sagle, Idaho
Posts: 361
Default Re: Throttle linkage and spring on engine side of firewall

Quote:
Originally Posted by Gene F View Post
Go to website jerrysclassiccars click on catalog. scrolldown to 100, and 101 on the left side. With that, and the photo you shoulkd be a ble to figure it out. FYI, the photo shows that spring goes downward. I can't recall, but I think the bottom end of that may hook into a lit in the cold along a seam.

Jerry's can sell you the springs. My guess is a spring broke, or got lost, and someone just made do with something from an old piece of equipment, or the hardware store.

Tip; don't change the length of that TV rod (the one that goes down to the transmission. It works like a throttle position sensor on a modern car.
Thank you. I printed them off but can't quite envision it. It shows two springs and I only had one that obviously came from a hardware store. Thanks again.
Oldgearz is offline   Reply With Quote