The Ford Barn - View Single Post

1936 ford pickup · 11-02-2023, 01:14 PM

Hello to all....I bought the Bolt Buster 1800 and it worked perfectly to remove all 48 hex nuts from the flatheads. It did quit working once (I "think" I got it overheated, because they state 2 minutes of use then 2 minutes of cool down period). I went onto their web-site and followed the instructions for getting an RMA (Returned Materials Authorization) Form, filled it all out via. the computer and sent to them. They responded right back with the RMA number and I noted that number when I shipped the Bolt Buster to them. About 2 weeks later I got the repaired and working unit back.

I have had no problems with them I and I do recommend the Bolt Buster 1800.

Bruce in Ca.

11-02-2023, 01:14 PM	#15
1936 ford pickup Senior Member Join Date: Feb 2015 Posts: 221	Re: Bolt buster /induction heater Hello to all....I bought the Bolt Buster 1800 and it worked perfectly to remove all 48 hex nuts from the flatheads. It did quit working once (I "think" I got it overheated, because they state 2 minutes of use then 2 minutes of cool down period). I went onto their web-site and followed the instructions for getting an RMA (Returned Materials Authorization) Form, filled it all out via. the computer and sent to them. They responded right back with the RMA number and I noted that number when I shipped the Bolt Buster to them. About 2 weeks later I got the repaired and working unit back. I have had no problems with them I and I do recommend the Bolt Buster 1800. Bruce in Ca.