The Ford Barn - View Single Post

wrndln · 10-05-2023, 08:49 AM

I have installed 2 sets of metal valve stems. Only 1 has a very slow leak. I didn't use any cement. I did have USA made inner tubes. That may be part of your problem if you have foreign made inner tubes. I believe the key thing is to tighten the locking nuts firmly, but no excessive force. Ford did not use any sealer.

10-05-2023, 08:49 AM	#2
wrndln Senior Member Join Date: May 2010 Location: Lakeville, MN Posts: 5,175	Re: Installation of Schrader Valve Stems I have installed 2 sets of metal valve stems. Only 1 has a very slow leak. I didn't use any cement. I did have USA made inner tubes. That may be part of your problem if you have foreign made inner tubes. I believe the key thing is to tighten the locking nuts firmly, but no excessive force. Ford did not use any sealer.