The Ford Barn - View Single Post

Terry, NJ · 10-01-2023, 03:49 PM

Well guys, I thought I'd update this and maybe have a teachable moment too. I Knew that engine was loose! I did! However, I had to disconnect it from the driveline to find out how it really was. I pulled the engine and t was fine, something is locked up in the , I believe, the trans. Frankly, it's acting kind of weird, it acts like it's in two gears at once! Anything is possible I guess! The I cracked the fly wheel housing. No actually it broke! I very gently tapped it a piece with old rusty, crack lines dropped off the bottom. More about that in my thread about REPUBLIC B140.
Terry

10-01-2023, 03:49 PM	#9
Terry, NJ Senior Member Join Date: May 2010 Location: Bucks Co, Pa Posts: 3,749	Re: I've got a problem! Well guys, I thought I'd update this and maybe have a teachable moment too. I Knew that engine was loose! I did! However, I had to disconnect it from the driveline to find out how it really was. I pulled the engine and t was fine, something is locked up in the , I believe, the trans. Frankly, it's acting kind of weird, it acts like it's in two gears at once! Anything is possible I guess! The I cracked the fly wheel housing. No actually it broke! I very gently tapped it a piece with old rusty, crack lines dropped off the bottom. More about that in my thread about REPUBLIC B140. Terry