Re: unsticking a starter
Sponsored Links (Register now to hide all advertisements)
If the shaft is not bent, look at the ring gear to see if there is a section with some gubbered up teeth or whether the ring gear has moved away from the flange on the flywheel. If the ring gear is OK and the shaft is not bent then you could try a modern Bendix drive, available from the vendors.
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
|