View Single Post
Old 08-02-2023, 12:04 PM   #11
big job
Senior Member
 
big job's Avatar
 
Join Date: Sep 2013
Location: Dighton, Mass
Posts: 1,231
Default Re: Charging System Issue

If I read this correctly, you jumped the field wire and got 8 volts; that rules out the generator have you jumped the field wire to the Bat terminal? Looks like there is no
field signal from the regulator. Also is the cutout closed or open when running. If open
close it with your finger. Regulator could be way out of adjustment also check the resistors on the back of the regulator...
big job is offline   Reply With Quote