Sponsored Links (Register now to hide all advertisements)
Fordor Briggs 60C
Tightened the screws and it helped a little.. lifting it up about a 1-2 mm
I noticed that the original restorer did not replace all the wood. So I would not be surprised if my header has sagged or is of the same condition as noted in another response.
I have two screws missing so I need to fix that. After Tightening the remaining screws I can now close window almost completely. Some were loose and all tightened up into the wood securely.
Will replace the missing screws and loosen and re-tighten all to pull up the hing evenly and hope for the best