The Ford Barn - View Single Post

Big hammer · 07-25-2023, 08:27 AM

Measure and check with a level, re-measure and re-check with a level, and again. This will get you in the ballpark, I used masking tape to hold the tail light assembly to the fender and stood back. When it looks right by your eyes, it’ll look right. Kinda like hanging a picture

07-25-2023, 08:27 AM	#5
Big hammer Senior Member Join Date: Jun 2014 Location: Land of Lincoln Posts: 3,430	Re: Adding ritght side tail light Measure and check with a level, re-measure and re-check with a level, and again. This will get you in the ballpark, I used masking tape to hold the tail light assembly to the fender and stood back. When it looks right by your eyes, it’ll look right. Kinda like hanging a picture __________________ Don't force it with a little hammer tap, tap, tap get a bigger hammer tap done