The Ford Barn - View Single Post

old31 · 07-25-2023, 04:14 AM

If you measure from the ground up to the left bracket to get the hole placement, make sure your car does not have a sag to one side. Meaning, if you car has a 1" sag to the left your measurement will be 1" off on the other side when you mount our new bracket.

No need to remove the left bracket. Just order a new right bracket, mark the holes and drill.

Also, change the rear bulbs to led's.

07-25-2023, 04:14 AM	#3
old31 Senior Member Join Date: Jan 2016 Posts: 2,459	Re: Adding ritght side tail light If you measure from the ground up to the left bracket to get the hole placement, make sure your car does not have a sag to one side. Meaning, if you car has a 1" sag to the left your measurement will be 1" off on the other side when you mount our new bracket. No need to remove the left bracket. Just order a new right bracket, mark the holes and drill. Also, change the rear bulbs to led's.