[Admiral]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by cadillac512

Personally I like a high quality fiber gasket.

Originally Posted by Kube

I believe the fiber type seals better.

Thanks, guys. I was leaning toward fiber as well. Seems like it will conform better to a somewhat irregular surface should the pan or plug be less than perfect. For less than $2 I'll get a stack of them.

Originally Posted by 35fordtn

On a side note I see your car is a 36 Does it have a later oil pan with the large plug? If not both of the gaskets you shared would be too large if it's a original 36 pan

Thanks for the heads up. I'm running a 59L block, so yes, my car should have the large drain plug. The threaded portion is gigantic, around 2 inches in diameter.