The Ford Barn - View Single Post

Will N · 06-30-2023, 09:48 AM

Yes, you can leave the rear spring attached to the axle and remove the torque tube. Remember you have to preload the two bearings on the end of the driveshaft. And also keep in mind that the gaskets on the differential housing are not just there to stop the oil leaking out- they serve as spacers to align the fit of the ring gear to the pinion gear.

06-30-2023, 09:48 AM	#2
Will N Senior Member Join Date: Jul 2010 Location: Pennsylvania Posts: 1,116	Re: Rear Axel, I have done something stupid Yes, you can leave the rear spring attached to the axle and remove the torque tube. Remember you have to preload the two bearings on the end of the driveshaft. And also keep in mind that the gaskets on the differential housing are not just there to stop the oil leaking out- they serve as spacers to align the fit of the ring gear to the pinion gear.