The Ford Barn - View Single Post

34fordy · 06-07-2023, 04:05 PM

I would prefer a coil without a resistor and have the resistor ahead of the coil. Then you can have a bypass wire around the resistor to the coil when the engine is cranking. JMHO. I had this same problem years ago on a different brand. It was an instant cure for the hot/no start.

06-07-2023, 04:05 PM	#5
34fordy Senior Member Join Date: Dec 2014 Location: Fort dodge, Iowa Posts: 870	Re: hard start only when hot I would prefer a coil without a resistor and have the resistor ahead of the coil. Then you can have a bypass wire around the resistor to the coil when the engine is cranking. JMHO. I had this same problem years ago on a different brand. It was an instant cure for the hot/no start.