The Ford Barn - View Single Post

19Fordy · 02-16-2023, 09:29 AM

Roger, also make sure your speedometer cable is installed straight into the back of your speedo without any sharp bends. I use a wire tie to support mine in a 40 Ford.
I would hesitate about using oil or grease as they hold contaminents and dry out.

02-16-2023, 09:29 AM	#5
19Fordy Senior Member Join Date: May 2010 Location: Coral Springs FL Posts: 11,604	Re: lubrication for speedometer cable Roger, also make sure your speedometer cable is installed straight into the back of your speedo without any sharp bends. I use a wire tie to support mine in a 40 Ford. I would hesitate about using oil or grease as they hold contaminents and dry out. Last edited by 19Fordy; 02-17-2023 at 10:26 AM.