02-09-2023, 07:45 PM
|
#2
|
|
Senior Member
Join Date: May 2015
Posts: 10,145
|
Re: 59 block oil relief plunger install
Quote:
Originally Posted by joel
I am using the 8ba helical gear oil pump with the 50 psi relief spring and the original block relief plunger has a flat on it that appears to allow "leakage" into the cam gear compartment. I also have a new plunger and spring and this plunger does not have the flat on it . Which should I use? I have a picture of the original plunger.
|
|
|
|