The Ford Barn - View Single Post - Head Gasket replacement step-by-step ?

tubman · 02-01-2023, 12:07 PM

If you are planning on replacing head gaskets, it might be a good idea to check the heads and block for flatness before you reassemble them. This could eliminate the chance of future blown gaskets. It can be accomplished with a straight edge and feeler gauge.

02-01-2023, 12:07 PM	#4
tubman Senior Member Join Date: Dec 2013 Location: Minnesota, Florida Keys Posts: 12,132	Re: Head Gasket replacement step-by-step ? If you are planning on replacing head gaskets, it might be a good idea to check the heads and block for flatness before you reassemble them. This could eliminate the chance of future blown gaskets. It can be accomplished with a straight edge and feeler gauge.