View Single Post
Old 01-31-2023, 08:19 PM   #3
JayChicago
Senior Member
 
JayChicago's Avatar
 
Join Date: Jan 2019
Location: Chicago
Posts: 926
Default Re: '51 Tudor Ign Switch Help

Wire in the diagram shown going to "coil" / "I", goes to your switch terminal marked "IGN"

Wire in the diagram shown going to "AM" / "B", goes to your switch terminal marked "Bat"

Wire in the diagram shown going to "ST" / "S", goes to your switch terminal marked "ST". (Photo is not clear, but it appears your switch is marked "ST" with arrow pointing to the center terminal)

Wires in the diagram shown going to "ACC" / "A", go to your switch terminal marked "ACC"

Last edited by JayChicago; 01-31-2023 at 08:25 PM.
JayChicago is offline   Reply With Quote