01-19-2023, 09:15 PM
|
#7
|
Senior Member
Join Date: May 2010
Posts: 1,836
|
Re: 1955 Ford Thunderbird overdrive solenoid install.
Quote:
Originally Posted by Alaska Jim
There is a procedure to correctly install the solenoid, and it does involve a 90* turn/rotation. it has been awhile since I instlled one, but there are many free on-line copies of the borg-warner overdrive manual, or get a shop service manual which will explain it and also have pictures. Ther may be some one else here , or on the early v8 forum that can explain it better. when it is installed correctly, you will not be able to pull the solenoid back out, it will "hang-up" and only move out about a 1/4 inch and have spring pressure against it. hard to explain, you really need a manual
|
Yes ,but you gave me something to try.
__________________
"Never complain,never explain"... Henry Ford II
|
|
|