The Ford Barn - View Single Post

Mike Peters · 01-09-2023, 07:14 PM

I recently had a similar stuck cam nut that wouldn't budge with a wrench without stripping the fiber cam gear. So I gave it a good whack with a heavy hammer and cold chisel and it came loose. I never thought of using an impact wrench. Will try that on then next tough cam nut.
Thanks for the tip!

01-09-2023, 07:14 PM	#8
Mike Peters Senior Member Join Date: Aug 2012 Location: South East Wisconsin Posts: 1,279	Re: Really stuck cam nut I recently had a similar stuck cam nut that wouldn't budge with a wrench without stripping the fiber cam gear. So I gave it a good whack with a heavy hammer and cold chisel and it came loose. I never thought of using an impact wrench. Will try that on then next tough cam nut. Thanks for the tip!