The Ford Barn - View Single Post

GB SISSON · 12-05-2022, 04:55 PM

I have a pretty powerful pressure washer. I have an extra wand I could alter if needed. Seems maybe with the flywheel end up high, one could blast down into the head cooling holes, starting in the back, maybe a steel wire too. Drag/blast out loose stuff, then soak with vinegar/evaporust/some kinda acid?

12-05-2022, 04:55 PM	#37
GB SISSON Senior Member Join Date: Jan 2014 Location: Orcas Island Washington Posts: 5,138	Re: Testing blocks in the home shop I have a pretty powerful pressure washer. I have an extra wand I could alter if needed. Seems maybe with the flywheel end up high, one could blast down into the head cooling holes, starting in the back, maybe a steel wire too. Drag/blast out loose stuff, then soak with vinegar/evaporust/some kinda acid? __________________ Owner/Operator of 'Jailbar Ranch' on the side of Mt. Pickett. Current stable consists of 1946 1/2 ton pickup turned woodie wagon with FH V8, 1946 Tonner Pickup with 226 H six, 1979 Toyota landcruiser wagon, now wearing 1947 Ford Jailbar sheet metal. 'Rusty ol' floorboards, hot on their feet' (Alan Jackson)