The Ford Barn - View Single Post

jeepguy1948 · 12-02-2022, 01:38 PM

If anybody wants to pm me with their email address I will forward the information that I got from MICO and then you could post it. BTW Glenn I have a different part number that has specs the same as the unit in the article (03-020-411) and would be better suited for our application as it has a smaller N bore. Anyway, all that aside, I do not see any advantage to the MICO when compared to the step bore Cardone. I don’t see any mechanical advantage to the MICO vs the Cardone. When you consider that that article was written in 1974, long before the step bore Cardone came along. I believe that essentially the Cardone is using the same technology, possibly they cloned the MICO.

12-02-2022, 01:38 PM	#71
jeepguy1948 Senior Member Join Date: Jan 2022 Posts: 889	Re: What Master Cylinder If anybody wants to pm me with their email address I will forward the information that I got from MICO and then you could post it. BTW Glenn I have a different part number that has specs the same as the unit in the article (03-020-411) and would be better suited for our application as it has a smaller N bore. Anyway, all that aside, I do not see any advantage to the MICO when compared to the step bore Cardone. I don’t see any mechanical advantage to the MICO vs the Cardone. When you consider that that article was written in 1974, long before the step bore Cardone came along. I believe that essentially the Cardone is using the same technology, possibly they cloned the MICO.