The Ford Barn - View Single Post - Crankshaft Pulley Bolt (P/N 5-Z1900)

5lugnuts · 11-28-2022, 05:24 PM

I bought a 1/2 inch drive 1 3/8 inch socket. Used an extension and rachet to get to it from the crank hole in the grill. Much easier than a wrench. Because it sticks out between the grill and bumper it is hard to forget to remove it. Although I probably could.

11-28-2022, 05:24 PM	#13
5lugnuts Senior Member Join Date: Aug 2015 Location: Clermont in Central Florida Posts: 111	Re: Crankshaft Pulley Bolt (P/N 5-Z1900) I bought a 1/2 inch drive 1 3/8 inch socket. Used an extension and rachet to get to it from the crank hole in the grill. Much easier than a wrench. Because it sticks out between the grill and bumper it is hard to forget to remove it. Although I probably could.