The Ford Barn - View Single Post

34fordy · 11-24-2022, 11:57 AM

[QUOTE=19Fordy;2183742]34fordy: Since the clamshell is 2 pieces, I think it would be possible to install the new o-ring seal (if there is enough room) without separating the drive line. However, you would also have to cut the paper gaskets and install them with the cut at the top. Take a look at the photos in this thread (from my 40) that may help.

Thanx very much for the great info 19Fordy! Exactly what I needed.

11-24-2022, 11:57 AM	#13
34fordy Senior Member Join Date: Dec 2014 Location: Fort dodge, Iowa Posts: 864	Re: 36 ford trans removal [QUOTE=19Fordy;2183742]34fordy: Since the clamshell is 2 pieces, I think it would be possible to install the new o-ring seal (if there is enough room) without separating the drive line. However, you would also have to cut the paper gaskets and install them with the cut at the top. Take a look at the photos in this thread (from my 40) that may help. Thanx very much for the great info 19Fordy! Exactly what I needed.