The Ford Barn - View Single Post - Anti-seize lube for aluminum cylinder head

rotorwrench · 11-21-2022, 11:48 AM

I used copper base antiseize but changed over to nickel based for stainless fasteners on the turbine engines. Either is fine for model A engine fasteners. Any antiseize should work on them since there are no original stainless fasteners in the early Ford cars.

11-21-2022, 11:48 AM	#8
rotorwrench Senior Member Join Date: Jun 2010 Location: San Antonio, Texas Posts: 16,497	Re: Anti-seize lube for aluminum cylinder head I used copper base antiseize but changed over to nickel based for stainless fasteners on the turbine engines. Either is fine for model A engine fasteners. Any antiseize should work on them since there are no original stainless fasteners in the early Ford cars.