The Ford Barn - View Single Post

Bored&Stroked · 09-27-2022, 10:22 AM

Interesting. Have you checked to see if it happens to fit the transmission and clutch fork? I'm just curious.

Also, is this a LONG style clutch, Borg & Beck, or Diaphragm?

Depending on the clutch setup, it may or may not work and it may also be important to understand the LENGTH the clutch requires from the fork front to the PP fingers . . . is this length different with this TO bearing versus the typical ones we're used too?

09-27-2022, 10:22 AM	#8
Bored&Stroked Senior Member Join Date: Jan 2011 Location: Central Ohio Posts: 5,723	Re: Clutch release hub help Interesting. Have you checked to see if it happens to fit the transmission and clutch fork? I'm just curious. Also, is this a LONG style clutch, Borg & Beck, or Diaphragm? Depending on the clutch setup, it may or may not work and it may also be important to understand the LENGTH the clutch requires from the fork front to the PP fingers . . . is this length different with this TO bearing versus the typical ones we're used too?