View Single Post
Old 09-19-2022, 11:25 AM   #17
blucar
Senior Member
 
blucar's Avatar
 
Join Date: Jul 2010
Location: Ventura, CA
Posts: 2,464
Default Re: 59AB Going into my '33 Truck, Generator Question

Deuce lover's comment in #15 is correct about a '39 generator, however, the comment about the needing '49-50 Merc water pump mount adapters on a 59AB installation into a EFV8 is wrong.. The '49-50 Mercs adapters are only required on the 8BA/8CM engines, 49-53.
I converted the generator on my '36 from a three brush shunt, to a 39 two brush w/ regulator in '52. The '39-48 generators are basically the same except for the pulley, which has provisions for the fan blade to mount to the front of the generator with 4, 1/4" bolts.
I think it should be pretty simple to remove the outer pulley from the pulley, quite often the second pulley is bolted to the assembly.
__________________
Bill.... 36 5 win cpe

Last edited by blucar; 09-19-2022 at 11:31 AM.
blucar is offline   Reply With Quote