Quote:
Originally Posted by jimTN
Use a gen with a fan on it, either a 33-8 w/cutout out 39 with voltage reg. Yes, it mounts on the manifold. You will need to use a 33/4 fan because it has the correct spacer on it.
|
Thank you Jim, If I use the generator with the fan on it, I will need to change the crank pulley to just one instead of a double, correct. The crank, fan & water pumps will all run on just one belt, correct? Thank you for your help!!
I'm setup right now with 2 pulleys and the drop down. A friend of mine gave me the bad news and said that was wrong for the 33 truck. That's when it started, it was 50/50 with everyone's opinion, but the friend of mine who told me is an expert on 33/34's, however has never done a truck. He also told me that I'll probably never find the correct generator & fan since he hasn't seen one in years around here in CA at swap meets. Any suggestions to locate one? Thanks again, Jeff