The Ford Barn - View Single Post

Kingo · 07-18-2022, 09:45 PM

If the seat is the same as a fordor it is not hard, but the seat upholstery will need to be disassembled. The spring is held in place with two pieces of material that is wrapped around the springs and tacked to the seat frame. The padding goes over the seat and then the upholstery. The bottom of seat upholstery gets tacked to wooded ledge in bottom of the seat frame and the upper gets tacked to wood seat edge that goes around the top of seat.

07-18-2022, 09:45 PM	#3
Kingo Member Join Date: Aug 2011 Posts: 76	Re: 1930 Front Seat Back Rest Spring If the seat is the same as a fordor it is not hard, but the seat upholstery will need to be disassembled. The spring is held in place with two pieces of material that is wrapped around the springs and tacked to the seat frame. The padding goes over the seat and then the upholstery. The bottom of seat upholstery gets tacked to wooded ledge in bottom of the seat frame and the upper gets tacked to wood seat edge that goes around the top of seat.