Thread: compression
View Single Post
Old 04-14-2022, 03:26 PM   #3
nkaminar
Senior Member
 
nkaminar's Avatar
 
Join Date: Jan 2012
Location: Western North Carolina
Posts: 4,048
Default Re: compression

About 6 to 1 unless you get a really high one that were made in the 60's. A racing engine may be 12 to 1 or higher, maybe 16 to 1. That requires a special fuel.

There is more to head design than the compression ratio. It requires clearance so that the valves can breathe and so that the cylinder is not choked off. The squish area is also important to provide turbulence for better combustion.
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.

Last edited by nkaminar; 04-15-2022 at 07:10 AM. Reason: correct typo
nkaminar is offline   Reply With Quote