The Ford Barn - View Single Post

Unclepalmer · 02-09-2022, 06:38 PM

we looked at that: the ammeter does not wiggle., so prob bad. however, it is passing power between the 2 terminals as we are getting power "downstream". i have an old one i can put in but point well taken. we did catch a couple of shorts inside the distributor lower plate. prob need to recheck that again.

02-09-2022, 06:38 PM	#15
Unclepalmer Junior Member Join Date: Feb 2016 Location: Texas Posts: 20	Re: Model AA cyclinder compression we looked at that: the ammeter does not wiggle., so prob bad. however, it is passing power between the 2 terminals as we are getting power "downstream". i have an old one i can put in but point well taken. we did catch a couple of shorts inside the distributor lower plate. prob need to recheck that again.